Skip to main content

Fail-Safe Data Recording Fail-Safe Data Recording

UniCAN 3 ETH Data Logger

Data logger for mobile applications with Ethernet interface

The UniCAN 3 ETH is a compact and robust data logger for the acquisition of data from various sources: With the Ethernet interface, nine CAN interfaces, digital inputs and outputs and numerous data transmission options, it can be used flexibly in any measurement task.

Measurement data from ECUs, vehicle buses and also CSM MiniModules are reliably recorded via the Ethernet interface and CAN. With optional extensions for supported CAN protocols and other features (CANsend, CAN Stimulation...), the data logger can be configured for specific applications.

The configuration software CSMuniconf is used to configure the data logger and to verify proper operation via live monitoring. CSMdataconv allows easy (automated) management and conversion of even larger data quantities, as they may occur during fleet operation.

Key-Features

Overall

  • AUTOSAR PDU support
  • Very low power consumption (Operation and Stand-by)
  • Display for visualization of device status and error codes
  • Verification of configuration and data recording via Live Monitoring

Ethernet interface

  • Data acquisition from ECUs
  • Data from CSM ECAT MiniModules can also be recorded via an XCP-Gateway
  • IEEE 10BASE-T, IEEE 100BASE-TX
  • Acquisition of Ethernet Frames (UDP or TCP)
  • Support of XCP-on-Ethernet (UDP)

9 CAN interfaces

  • Data acquisition from CSM CAN MiniModules, ECUs and buses
  • Support of CCP, XCP-on-CAN, CCP Block Read, OBD2 / EOBD, J1939
  • Optional support of CAN FD for all CAN interfaces
  • Optional support of Wake-on-CAN with no message lost, configurable per interface
  • Optional isolated CAN Bus

4 digital I/O interfaces

Flexible data recording and transmission

  • Encryption levels for increased protection of recorded data
  • Exchangeable CF card up to 64 GB
  • Available hardware options:
    • GPS receiver with detached antenna
    • LTE modem (+ UMTS / EDGE / GPRS)
    • WLAN module (WPA2-Enterprise (RADIUS) and WPA2-Personal (PSK)
  • Status information and selected measurement channels in real time via MQTT
UniCAN 3 ETH Datenlogger
UniCAN 3 ETH data storage and modem
UniCAN 3 ETH back
UniCAN 3 ETH communication ports

 

 

UniCAN 3 ETH Options

The UniCAN 3 ETH Datenlogger data loggers are offered in different hardware and software versions. Please find an overview below:

Ethernet
Number of CAN 9
Recording of CAN messages (trace)
Recording of CAN signals
Number of measurement groups 16
CAN FD
CAN galvanically isolated
Number of digital I/O 4
USB
LAN
CF Card support up to 64 GB
GPS
LTE / UMTS / EDGE / GPRS
WLAN
CCP
XCP-on-Ethernet
XCP-on-CAN
CCP Block Read
OBD2 / EOBD
J1939 (CAN according to SAE J1939-21 / CAN FD according to SAE J1939-22)
Autosar PDU
CANsend
CAN Stimulation
Wake-on-CAN (with no message lost)
Seed & Key
Live Monitoring (via USB)
Live Data (via MQTT)

 included
 optional



Downloads


English
V.1.0.1
340.16 KB


English
V.2.0.0
3.19 MB


English
V.3.0.0
709.95 KB


English
V.1.0.0
1.12 MB
During a fleet test of electric vehicles in Asia, very high ambient temperatures of more than +50°C were encountered. For the analysis of the interior temperatures in interaction with the electric...

Sustainability and electrification on the road not only affect passenger transport, but also the areas of transportation and logistics. How commercial vehicles can be replaced by electric vehicles,...


V.2.22
42.41 MB

Firmware for UniCAn 3 ETH data loggers


Multilanguage
V.3.9.0
126.44 MB
    {lang en}
  • Configuration software for data logger from UniCAN 3, UniCAN 2, UniCAN 2 Professional
  • System requirements: for Windows (32 bit and 64
...