Home
Newsletter
UniCAN 3 Data Logger
The data logger for mobile applications
With up to 12 CAN bus interfaces, freely configurable digital inputs and outputs, Wake-on-CAN, LAN, WLAN - When developing the UniCAN 3 data logger, numerous requirements from state-of-the-art vehicle development were taken into account.
As a further development of the proven UniCAN 2 stand-alone data logger, you will also be very well prepared for future measurement tasks with the CSM UniCAN 3 data logger.
As already known from the UniCAN 2, the UniCAN 3 optionally supports various CAN protocols (CCP, XCP,...) and software extensions (CANsend, CAN stimulation,...).
The recorded data can be transmitted via LTE or WLAN, alternatively also locally via network (LAN), USB or by changing the CF card.
The configuration software CSMuniconf is used to configure the data logger and to verify proper operation via live monitoring. CSMdataconv allows easy (automated) management and conversion of even larger data quantities, as they may occur during fleet operation.
Key Features
- Up to 12 CAN bus interfaces, also galvanically isolated
- Optional support of Wake-on-CAN with no message lost, configurable per interface
- Support of CAN FD for all interfaces
- 4 digital I/O interfaces
- Exchangeable CF card up to 64 GB
- Available hardware options:
- GPS receiver with detached antenna
- LTE modem (+ UMTS / EDGE / GPRS)
- WLAN module (WPA2-Enterprise (RADIUS) and WPA2-Personal (PSK))
- AUTOSAR PDU support
- Very low power consumption
- Verification of configuration and data recording via Live Monitoring (via USB)
- Status information and selected measurement channels in real time via MQTT
- Display for visualization of device status and error codes
- Encryption levels for increased protection of recorded data
Global Fleet Deployment
A wide range of functions is available for data transmission to effectively integrate the post-processing of UniCAN 3 recorded data in your internal processes. Due to the use of the LTE modem and WLAN, data can be transmitted while the recording of data continues. The interfaces can also be used to change the logger configuration during operation. If remote data transmission is not desired, the data transmission can be carried out via network (LAN) or simply by changing the CF card.
UniCAN 3 Versions
The UniCAN 3 data loggers are offered in different hardware and software versions. Please find an overview below:
| Number of CAN | up to 12 |
|---|---|
| Recording of CAN messages (trace) | |
| Recording of CAN signals | |
| Number of measurement groups | 16 |
| CAN FD | |
| CAN galvanically isolated | |
| Number of digital I/O | 4 |
| USB | |
| LAN | |
| CF Card support | up to 64 GB |
| GPS | |
| LTE / UMTS / EDGE / GPRS | |
| WLAN | |
| CCP | |
|---|---|
| XCP-on-CAN | |
| CCP Block Read | |
| OBD2 / EOBD | |
| J1939 (CAN according to SAE J1939-21 / CAN FD according to SAE J1939-22) | |
| CANsend | |
| CAN Stimulation | |
| Wake-on-CAN (with no message lost) | |
| Seed & Key | |
| Live Monitoring (via USB) | |
| Live Data (via MQTT) | |
included
optional
Downloads
- Configuration software for data logger from UniCAN 3, UniCAN 2, UniCAN 2 Professional
- System requirements: for Windows (32 bit and 64
