CAN TH MiniModules
Temperature measurements with K-, J- and T-type thermocouples
CSM’s Thermo MiniModules allow precise distributed temperature measurements with K-, J- and T-type thermocouples: ideal for measurements in the powertrain, on HVAC (Heating, Ventilation, and Air-Conditioning) components, in the vehicle interior, the powertrain development and many more.
Thanks to the extremely low power consumption, TH modules have an extremely low temperature drift. These modules provide highly accurate measurement results over the entire operating temperature range from -40 °C to +125 °C. The compact and robust module housings allow direct mounting in the engine compartment or invisible mounting in the vehicle interior.
The TH8 evo measurement modules offer the support of TEDS according IEEE 1451.4 standard for easier configuration of the used sensors.
These modules feature an internal cold junction compensation per channel. The socket contacts are made of the same material as the corresponding thermocouple. This minimizes interferences caused by temperature differences and ensures an extremely good accuracy over the entire operating temperature range.
Module versions for:
- K-, J- and T-type thermocouples
- Single- or multi-channel connectors
TH pro
- 8 or 16 channels
- Send rate from 1 Hz to 200 Hz per channel
- Module versions with K-, J- and T-type thermocouples
- Bicolor LED per channel to indicate operating status and sensor failure
TH8 evo
- TH pro features plus:
- TEDS support according to IEEE 1451.4 standard (template 36)
- 8 channels
- Send rate from 1 Hz to 200 Hz per channel
- For K-type thermocouples
Housing variants
Designation | Case Small (CS) | Slide Case Small (SCS) | Case Large (CL) | Slide Case Large (SCL) | Case Deep (CD) |
---|---|---|---|---|---|
TH8 pro | |||||
TH8 evo * | |||||
TH16 pro | |||||
THMC 16 | |||||
THMC 16 CANopen |
* only "Type K"
Downloads
Downloads
Firmware for TH8 CAN modules, HW revision B (Case Deep) Firmware für TH8 CAN Module,
...Firmware for TH8 CAN modules, HW revision G
Firmware for TH8 CAN modules, HW revision H
Firmware for TH16 CAN modules, HW revision D
- Configuration software for CSM measurement modules (incl. documentation)
- with visualization software CSMview
- System requirements: