Skip to main content
Use Cases
Use Cases

Fast Measurement of Voltage and Current Flows on E-Machines

During the development of the electric power train for electric vehicles, voltage and current characteristics at the AC phases of the electric motors must be recorded and analyzed. The HV Breakout Modules are particularly suitable for this purpose, as they measure required values extremely quickly, synchronously and precisely.

Icon Background

Background

The synchronous and fast measurement of currents and voltages in all phases of an electric motor is the basis for the exact calculation of the electrical power or the determination of the efficiency. From the sampled values, the active, apparent and blind power is calculated with the eMobilityAnalyzer, a package which is included in the Vector software vMeasure exp or CANape.

Measurement task

Current and voltage measurement for power calculation.

Icon Challenge

Challenge

In this example, the voltages and currents of each phase of a three-phase synchronous motor with a rated power of 43 kW are to be measured. Different load situations are simulated in the test bench by varying the speed and the torque. The high basic frequency of the inverter of 24 kHz (41.6 µs) requires a time resolution of the measured values in the microsecond range in order to also record short voltage pulses at low load. The 480 V battery voltage used also requires special safety measures for the measurement modules.

Measurement data of the three phases
Current and voltage curves of all three phases (at 2000 rpm and 37 Nm)
Icon Solution

The CSM-Solution

  • For current and voltage measurement, HV Breakout Modules (BM) 1.1 or 1.2 are inserted directly into the high-voltage cables. The modules measure currents and voltages directly synchronously and calculate the instantaneous power in real time if required. The measurement data can be output via the EtherCAT interface at a data rate of up to 1 MHz (1 µs).
  • Via a XCP-Gateway 4S pro that synchronizes the measurement modules via PTP (Precision Time Protocol), the measurement data can be easily forwarded to common data acquisition software such as vMeasure exp. The XCP-Gateway converts the data acquired with EtherCAT into the common XCP-on-Ethernet standard.
Details of the measurement
Detailed view of the three PWM voltage curves and three conductor currents (at 2000 rpm and 37 Nm)
Icon Benefits

Benefits

The HV Brekaout modules, with their high-voltage safe galvanically isolated inputs, ensure safety even at high voltages and meet the requirement for high time resolution of the measurement. With the synchronization of the measurement data and high measurement data rate, the current and voltage characteristics can be examined precisely. In this way, models created during development can be compared with the values actually measured and further optimizations can be made.

When using vMeasure exp, additional variables, e.g. power, can also be analyzed in real-time with the eMobilityAnalyzer.

Current and Voltage Measurement in E-Mobility Measurement System
Presentation of the current and voltage measurement in the systematics of the Vector CSM E-Mobility Measurement System

Download

Here you find the complete application case for download as PDF.

Featured Products

Related Hardware

Hochvolt Breakout-Module zu Leistungsmessung

HV Breakout Modules

Direct measurement of current, voltage and power

The HV Breakout Modules (BM) have been specifically designed for safe measurement applications on cables carrying high voltage. Current and voltage are evaluated and the power calculated online in the module.

Read more
XCP-Gateway

XCP-Gateway

The protocol converter for EtherCAT® and CAN to XCP-on-Ethernet

XCP-Gateway is the interface between the data acquisition software (e. g. vMeasure, CANape®, INCA®, Vision® ...) and the EtherCAT® measurement modules from CSM. It includes an EtherCAT® master and an XCP-on-Ethernet slave.

Read more
E-Mobility Measurement System

The Vector CSM E-Mobility Measurement System

The measurement system for the development of electric mobility

E-Mobility: Sicher messen an Hochvolt-Komponenten von Elektro- und Hybrid-Fahrzeugen Electromobility continues to gain momentum. Various energy storage, drive and charging systems pave the way to electric mobility. The development of high-voltage batteries, inverters and electric motors places high demands on measurement technology in order to obtain the right results for further optimization. Together with Vector Informatik, CSM has developed a measurement system that leaves nothing to be desired.

Read more

Related Software

Software CSMconfig

Logo CSMconfig

Swift configuration of measurement chains: CSMconfig is the reliable configuration software for all CAN and EtherCAT® based measurement modules from CSM. The clearly arranged and easy-to-use user interface allows an easy setting of all measurement parameters. This helps speeding up the measurement setup considerably.

Read more
vMeasure exp

vMeasure exp

Reliably Solving Complex Measurement Tasks

vMeasure exp, developed by Vector Informatik, is an easy-to-use software tool for the acquisition and analysis of measurement data that can be used in combination with all CAN- and EtherCAT®-based CSM measurement modules. CSMconfig was integrated directly to ensure swift configuration.

Read more