Skip to main content

Reliable CAN Measurement Technology Reliable CAN Measurement Technology

CAN AD MiniModules

Allround measurement modules for sensors with analog voltage outputs

CSM’s AD MiniModules of the AD CAN MM (MiniModule)-Series offer a wide range of applications for measuring analogue signals (voltage, current, pressure, flow rate, etc.).

The MiniModules score with their high measurement accuracy over the entire operating temperature range, the minimized sizes and the module housings’ protection class IP67. Due to the low intrinsic heat, the modules also reduce interference influences to a minimum.

AD CAN MM-Series

The AD4 MC10 has 4 channels and the AD8 MC2 / ADMM 8 has 8 channels. Both have galvanically isolated inputs for differential voltage measurements. The measurement inputs are adjustable per channel from ±100 mV up to ±60 V.

The AD4 MC10 also features measurement data rates of up to 10 kHz per channel.

AD4 MC10
AD4 MC10

AD pro CAN MM-Series

In comparison to the AD CAN MM-Series, the modules of the AD pro CAN MM-Series (AD4 pro MC10 for 4 channels and AD8 pro MC2 / ADMM 8 pro for 8 channels) provide very small measurement ranges which, for example, are suitable for the use of ratiometric sensors. Each channel of a “pro” module is equipped with a status LED. In addition, “pro” modules provide the option to use an extended scaling with 32 axis points per channel, instead of a 2-point scaling.

Module version AD8 pro MD2 / ADMM 8 pro2 has been specifically designed for sensors with excitation voltages up to 30 V. With its high-precision, galvanically isolated sensor excitation it is also suitable for sensors with ground-referenced signal inputs.

AD8 pro MC2
AD8 pro MC2

AD4 MX2

The AD4 MX2 is a new edition of our classic ADMM 4. Its extremely compact size (approx. 93 × 30 × 46 mm) remains unchanged, the technical characteristics have been further improved and optimized.

The AD4 MX2 is the smallest member of the CSM measurement module family and was consistently designed for applications in engine compartments with limited space. Four differential voltage inputs with unipolar sensor excitation provide excellent measurement accuracy.

The integrated TEDS functionality supports sensor configuration and identification for the application.

AD4 MX2 with CXS housing
AD4 MX2 with CXS housing

AD8 MW2

The measurement module AD8 MW2 / ADMM 8 BNC features 8 analog inputs and provides excellent measurement accuracy. Sensors with BNC plug can be connected directly. AD8 MW2 is particularly suited for use in protected places or at test benches.

AD8 MW2
AD8 MW2

Housing variants

Designation Case eXtra Small (CXS) Case Small (CS) Slide Case Small (SCS) Case Large (CL) Slide Case Large (SCL)
AD4 MX2          
AD4 MC10          
AD4 pro MC10          
AD8 MC2          
AD8 MC2 CANopen          
AD8 MW2          
AD8 pro MC2          
AD8 pro MD2          

 

Downloads

Downloads

Filename
Download Language
Version
Size

English
V.4.0.3
434.43 KB

English
V.4.0.3
407.75 KB

English
V.3.0.0
405.11 KB

English
V.3.1.0
494.71 KB

English
V.4.0.1
412.39 KB

English
V.1.0.0
1.74 MB


English
V.1.0.0
4.05 MB

English
V.2.0.1
858.5 KB


English
V.1.2.0
3.32 MB


English
V.1.2.0
1.13 MB
Motorsport places the toughest demands on man and machine; and also on the measurement technology that is indispensable for development. ABT Sportsline, together with Audi and Schaeffler, has used...

English
V.3.0.0
2.17 MB
Validation testing is often needed when extensive design updates are made to the vehicle system. In these cases, all important vehicle parameters are tested under a wide range of operating...

English
V.4.0.0
956.31 KB
Fuel cell-powered vehicles are a complement to pure battery electric-powered vehicles in electromobility. An electrochemical reactor is used to generate electrical energy that is available for the...


V.1.51
124.27 KB
Firmware for AD4 CAN modules, HW revision A

V.2.04
260.5 KB
Firmware for AD4 CAN modules, HW revision B

V.4.11
151.37 KB
Firmware for AD4 CAN modules, HW revision D

V.5.28
151.37 KB
Firmware for AD4 CAN modules, HW revision E

V.6.15
260.51 KB
Firmware for AD4 CAN modules, HW revision F

V.7.15
260.51 KB
Firmware for AD4 CAN modules, HW revision G

V.1.12
151.37 KB
Firmware for AD8 CAN modules, HW revision A

V.3.44
151.37 KB
Firmware for AD8 CAN modules, HW revision C

V.4.54
151.37 KB
Firmware for AD8 CAN modules, HW revision D

V.5.44
151.37 KB
Firmware for AD8 CAN modules, HW revision E

V.6.20
260.51 KB

Firmware for AD8 CAN modules, HW revision F


V.7.18
260.51 KB
Firmware for AD8 CAN modules, HW revision G

V.8.20
264.41 KB

Firmware for AD8 CAN modules, HW revision H


configview-4 CSMconfig UPDATED
Multilanguage
V.9.8.0
389.14 MB
    {lang en}
  • Configuration software for CSM measurement modules (incl. documentation)
  • with visualization software CSMview
  • System requirements:
...